Pamphlet- page 1

Oregon Valley
	GREENHOUSES, INC.

Brochure Page 1 Page 1 \| 2 \| 3 \| 4 \| 5 \| 6

GREENHOUSES MANUFACTURED BY IVAN & LYNNE SCHUENING & SON

Semi-Gable

Our Semi-Gable Greenhouse, designed as a multi-use structure, can be a growing or a holding house. Use it for flowers, hanging baskets, nursery stock, etc. It does not require a truss to be used for hanging baskets. This model is recommended for use in heavy snow areas and can be covered with Poly Carbonate.

Hardware and complete instructions for assembly included. Though lumber for end framing and sideboards is supplied by the customer, pre-fab steel end walls are available from the manufacturer.

BOWS: 1 7/8" steel pipe, .095 ga. (.095 ga. in heavy snow areas); Stress rating: 55,000 psi; 5' or 6' centers per need (4' for Poly Carbonate );
Secured with 1' x 1 5/8" sleeve, .072 ga.
Available in 2 3/8", .145 gauge

SIDEWALL: Built-in, 6 ft.

PURLINS: 3 rows, 1 3/8" pipe, .065 ga.

LEGS: 3' x 2 1/8" steel pipe, .065 ga.

END BRACES: 4 @ 21' x 1 3/8" pipe, .065 ga.

COVERS * available in Poly (48' x 100' ground to ground), Shade Cloth 46' x 100' ground to ground) or Poly Carbonate in corrugated or flats.
*Covers extra.

Note that we run our center purlin on top of our bows to stop poly sag and wear. Also, it helps the greenhouse shed rain and snow better.

Nature blows away the competition and leaves Oregon Valley Greenhouse standing.

"Covering Nurseries
Throughout the West"
Oregon Valley
Greenhouses, Inc.
20357 Hwy 99E
Aurora, Oregon 97002
(503) 678-2700
1-800-347-2701
(outside Oregon)

Next Brochure Page - 2