Low Profile Quonset

10’ to 20’ Wide, For Growing or Wintering Over

Our Low Profile Quonset Greenhouse may be used as a propagation house, growing house or wintering over house. This model is also recommended for heavy snow areas and can be covered with Poly or Poly Carbonate.

Note that Oregon Valley Greenhouses puts the center purlin on top of the bows. This stops poly sag and wear and allows the greenhouse to shed rain and snow easier.

BOWS: 1 5/8” .072 ga. & .085 ga. or 1 7/8” .095 ga. (.095 ga. in heavy snow areas); 4’, 5’ or 6’ on center per need (4’ OC if using Poly Carbonate).

SIDEWALL: Available from 4’ or 6’ high

LEGS: 6’ x 1 7/8” .072 ga. for standard house(4’ side walls). 1 7/8” .095 ga., 2 3/8” .134 ga. for taller sides.

PURLINS: 1 row, 1 3/8” pipe .065 ga.

END BRACES: 4 @ 8’ x 1 3/8” .065 ga. for houses under 60’. Houses 60’ & over in length require 4 @ 21’ x 1 3/8” .065 ga.

Hardware and complete instructions for assembly are included. Lumber for sideboards and end framing is supplied by the customer. Pre-fab steel end walls and roll-ups are available for purchase from the manufacturer.

Covers* Available in 32’ Poly ground to ground, Shade Cloth, or Poly Carbonate
*Covers are Extra