Semi-Gable

Our Semi-Gable Greenhouse, designed as a multi-use structure, can be a growing or a holding house. Use it for flowers, hanging baskets, nursery stock, etc. It does not require a truss to be used for hanging baskets. This model is recommended for use in heavy snow areas and can be covered with Poly Film or Poly Carbonate.

Note: We run our center purlin on top of our bows to stop poly sag and wear. Also, it helps the greenhouse shed rain and snow better.

BOWS: 1 7/8” or 2 3/8” steel pipe .095 ga. spacing 5’ or 6’ on center per need (4’ for Poly Carbonate)

SIDEWALL: Built-in 6’ clearance | Optional 6’ or 8’ straight sidewalls.

LEGS: 3’ x 2.197 .085 ga. | Optional 8’ or 10’6” x 2 3/8” .134 ga. for taller sides

PURLINS: 3 rows, 1 3/8” .065 ga.

END BRACES: 4 @ 21’ x 1 3/8” .065 ga.

Hardware and complete instructions for assembly are included. Lumber for side boards and end wall framing supplied by the customer. Pre-fab steel end walls, trusses and roll-ups are available for purchase from the manufacturer.

Custom Widths Available from 20’ to 32’ wide

Covers* Available in 48’ Poly ground to ground, 48’ Shade Cloth, or Poly Carbonate in corrugated or Twin Wall.

*Covers are Extra